61KM-8 260KM-8 159KM-8 0

DMK7 Drum Microphone Package 7 Piece

7 piece Drum Microphone Package

Comprising the following Microphones:

1 x KM-8.0 Low-Frequency Instruments

4 x KM-8.1 Drum & Brass Instruments

2 x KM-8.2 Overhead Instruments

KM-8.0 Low-Frequency Instruments

GENERAL


— Tailored frequency response is smooth and extended. Tuned specifically for kick drum applications.
— Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
— Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
— Cartridge includes a neodymium magnet for high output level.
— Internal shock mount for reduced handling noise.
— Durable metal construction.
— Integral stand mount.
— Hardened steel mesh tapered grille that resists wear and abuse.

 

SPECIFICATIONS


Microphone Type: Dynamic (moving coil)

Polar Pattern: Cardioid (unidirectional)

Frequency Response: 30 to 13,000 Hz polarity positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector

Output Impedance (at 1000 Hz): 300 ohms

Sensitivity (at 1000 Hz): -55dBV/Pa, (1.8mV), 1 Pascal=94dB SPL

Electromagnetic Hum Sensitivity: 25dB equivalent SPL in a 1 millioersted field (60Hz)

Connector: Three-pin professional audio connector (male XLR type)

Case: Die cast metal housing, back matte finish; hardened silver colored, tapered steel mesh grille; built-in locking stand adapter

Environmental Conditions: This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%

Net Weight: 470g

 

Typical Frequency Response Curve


 

KM-8.1 Drums and Brass Instruments

GENERAL


— Tailored frequency response is smooth and extended. Tuned specifically for drum applications.
— Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
— Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
— Cartridge includes a neodymium magnet for high output level.
— Internal shock mount for reduced handling noise.
— Durable metal construction.
— Integral stand mount.
— Hardened steel mesh tapered grille that resists wear and abuse.

 

SPECIFICATIONS


Microphone Type: Dynamic (moving coil)

Polar Pattern: Cardioid (unidirectional)

Frequency Response: 50 to 15,000 Hz

Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connecter

Output Impedance (at 1000 Hz): 200 ohms

Sensitivity (at l000 Hz): -56dBV/ Pa, (1.6mV), 1 Pascal=94 dB SPL

Electromagnetic Hum Sensitivity: 26dB equivalent SPL in a 1millioersted field (60 Hz)

Connector: Three-pin professional audio connector (male XLR type)

Case: Die cast metal housing, back matte finish; hardened silver colored, tapered steel mesh grille; built-in locking stand adapter

Environmental Conditions: This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%.

Net Weight: 323g

 

Typical Frequency Response Curve


KM-8.2 Instrument Over-Head Condenser Microphone

GENERAL


— Flat frequency response is wide and uniform. Consistent sensitivity through frequency range.
— Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
— Condenser cartridge has a lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances.
— Powered by AA battery or phantom power supply.
— Internal shock mount for reduced handling noise.
— Durable metal construction.
— On/off switch for onstage control.

 

SPECIFICATIONS


Microphone Type: Condenser (electret bias)

Polar Pattern: Cardioid (unidirectional), symmetrical about axis

Frequency Response: 40 to 18,000 Hz

Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector

Output Impedance (at 1000 Hz): 600 ohms

Sensitivity (at 1000 Hz): -48 dBV/Pa (4.0 mV), 1 Pascal = 94 dB SPL

Electromagnetic Hum Sensitivity: -7 dB equivalent SPL in a 1 millioersted field (60 Hz)

Switch: Built-in On/Off switch

Recommended Input Load Impedance: 800 ohms minimum

Output Clipping Level (l KHz, 1%THD): 2000 ohms Load -13dBV(0.22V) (phantom),-17dBV (0.14V)(battery)

Maximum SPL: 2000 ohm

Load: 131 dB (phantom),127 dB (battery)

Self-Noise (Equivalent SPL): 20 dB typical, A-weighted

Dynamic Range (maximum SPL, 2k ohm load, to A-weighted noise level): 111 dB (phantom); 107 dB (battery)

Signal-to-Noise Ratio: 68 dB (IEC 651)* at 94 dB SPL

Power: Phantom Power

Supply Voltage: 11 to 52 Vdc

Current Drain: 2.0 mA max at 52 Vdc

Maximum External Voltage Applied to Pins 2 and 3 with respect to Pin 1: +52 Vdc

Reverse polarity protected to: 100 Vdc

Battery Power Recommended: 1.5 V alkaline AA size (NEDA 15A)

Life: up to 10,000 hours

Net Weight: 250g less battery

 

Typical Frequency Response Curve


 

7 piece Drum Microphone Package Comprising the following Microphones: 1 x KM-8.0 Low-Frequency Instruments 4 x KM-8.1 Drum & Brass Instruments 2 x KM-8.2 Overhead Instruments KM-8.0 Low-Frequency Instruments GENERAL — Tailored frequency response is smooth and extended. Tuned specifically for kick drum applications. — Cardioid polar pattern picks up the most sound from in […]