, , ,

FLEX ARRAY TFA-600HW Dual 3 Way 10″ Line Array

Coming Soon!!!


Dual 3 Way 10″ Line Array Element with Combined Polyhorn and Dendritic Waveguide for Touring Applications

  • 3 way line array element for touring applications
  • Combined Polyhorn and Dendritic waveguide with 100° H x 16° V dispersion
  • 780 Watts continuous, 3,120 Watts peak power
  • Carbon fibre loaded 10 low frequency drivers with inside/outside wound coils
  • High efficiency 6.5 mid range driver with low mass coil for improved transient response
  • Aluminium dome 1 neodymium motor compression driver
  • Internal steel rigging for flying up to 12 TFA-600 elements in variable curvature array
  • 15 mm (5/8) birch plywood enclosure with hard wearing semi matt black paint finish
  • Rugged powder coated perforated steel mesh grille
  • Neutrik speakON* NL4 connectors for reliable long life operation
  • Designed and engineered in England

Technical Specs

Dimensions (H x W x D) 304 x 710 x 560 mm (12 x 28 x 22″)
Net Weight 42.5 kg (93.5 lbs)
Components 2 x Custom 10” (254 mm) LMF Drivers, 1 x Custom 6.5” (165 mm) HMF Driveron a Midrange Polyhorn, 1 x Custom HF Driver on a High Frequency Dendritic Device
Frequency Response 90 Hz – 18 kHz ±3 dB, 80 Hz – 20 kHz ±10 dB
Dispersion 75° H x 16° V @ -6dB Points
Sensitivity (1 W @ 1 M) LMF: 96 dB, MF: 108 dB, HF: 104 dB
Power Handling LMF: 600 Watts Continuous, 2,400 Watts Peak HMF: 120 Watts Continuous, 480 Watts Peak HF: 60 Watts Continuous, 240 Watts Peak
Calculated Max SPL Single Enclosure: 130 dB Continuous (Calculated SPL Addition), 136 dB Peak Multiple Enclosures: 2 x Line Array Enclosures 136 dB Continuous, 142 dB Peak, 3 x Line Array Enclosures 140 dB Continuous, 146 dB Peak, 4 x Line Array Enclosures 142 dB Continuous, 148 dB Peak, 2 x Point Source Enclosures 133 dB Continuous, 139 dB Peak, 3 x Point Source Enclosures 135 dB Continuous, 141 dB Peak, 4 x Point Source Enclosures 136 dB Continuous, 142 dB Peak
Nominal Impedance MF: 8 Ohms; HMF: 8 Ohms; HF: 8 Ohms
Crossover Tri-amp Mode: 90 Hz, 600 Hz, 6 kHz Active; Bi-amp Mode: 90 Hz, 600 Hz Active, 6 kHz Passive
Construction 15 mm (5/8”) Birch Plywood Throughout, Finished in Semi Matt Black Textured Paint. Eight Recessed Carrying Handles.
Grille Powder Coated Perforated Stainless Steel with Reticulated Foam Backing
Power Output 2 x Neutrik speakON* NL8 Wired: Pin 1 and 1- Link to NL4; Pin 2 : LF Positive; Pin 2-: LF Negative; Pin 3 : MF Positive, Pin 3-: MF Negative, Pin 4 : HF Positive, Pin 4- HF Negative
Rigging Integrated
Spares & Accessories LS-1025 10” (254 mm) LMF Loudspeaker
RC-1025 Recone Kit
LS-6507 6.5” (165 mm) HMF Loudspeaker
CD-117 HF Compression Driver
RD-117 Replacement Diaphragm

More Info

The TURBOSOUND FLEX ARRAY TFA-600HW is a compact trapezoidal three way enclosure combining a Dendritic HF device and a patented midrange Polyhorn in a single physically aligned waveguide with equal path length, ensuring a phase-coherent wavefront at the horn mouth. The TFA-600HW is supplied with a 100° horizontal by 16° vertical dispersion pattern, which is ideally adapted to wider rooms and downfill or outfillapplications.

The TFA-600HW contains a 1″ neodymium high frequency compression driver on a Dendritic device, a high efficiency 6.5″ high-mid frequency driver with low mass coil for improved transientresponse on a Polyhorn device, and two custom 10″ low frequency drivers. It is a switchable triamp/bi-amp enclosure, and includes a passive crossover network between the MF and HF drive units for bi-ampedoperation which can be bypassed for fully tri-amped operation by movingan internal jumper located inside the connector panel, the status of which is visible externally. Neodymium drive units are used throughout in order to achieve the compact cabinet’s exceptionally low net weight, making it convenient to transport, handle and rig. In addition the driveunits are symmetrically arranged within the enclosure, which contributes to the smooth and consistent horizontal and vertical coverage.

The enclosure has both vertical and horizontal flying systems integrated into the cabinet in order to facilitate simple and intuitive rigging with the minimum of external parts. The horizontal, orA’ mode, system is used to create flown or ground-stacked line array configurations. The B’ mode vertical rigging system is used for single box and virtual point source applications. This flexibility of use is made possible by the rotatable mid/high section, making it possible to address the majority of sound reinforcement applications with only one type of loudspeaker enclosure.

A flight-cased trucking system allows three boxes to be pre-rigged and transported together. The 15 mm (5/8″) birch plywood cabinet with rugged powder coated perforated steel mesh grille is equipped with eight recessed handles on the sides, rear, top and bottom, and is finished in hard wearing semi matt black paint. A recessed panel at the rear of the cabinet carries two parallel-linked Neutrik speakON* NL8 connectors for input and link through connections.