R4,179.00
In stock
R4,179.00
In stock
UniMount® clip permits accurate positioning, provides shock resistance, and protects the microphone element
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Extended frequency response captures subtle nuances of the performance
6′ (1.8 m) cable permanently attached to the microphone
Element | Fixed-charge back plate, permanently polarized condenser |
---|---|
Polar Pattern | Cardioid |
Frequency Response | 50-15,000 Hz |
Low Frequency Roll Off | 80 Hz, 18 dB/octave (wired only) |
Open Circuit Sensitivity | -45 dB (5.6 mV) re 1V at 1 Pa |
Maximum Input Sound Level | 145 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range | 115 dB, 1 kHz at Max SPL (wired only) |
Signal-to-Noise Ratio | 64 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 11-52V DC, 2 mA typical (wired only) |
Switches | Flat, roll-off (wired only) |
Weight (microphone) | 0.3 oz (8 g) |
Weight (power module) | 2.9 oz (81 g) (wired only) |
Cable | 6.0′ (1.8 m) long (permanently attached to microphone), 0.10″ (2.6 mm) diameter, 2-conductor, shielded cable |
Dimensions (power module) | 3.66″ (92.9 mm) long,0.74″ (18.9 mm) diameter (wired only) |
Dimensions (microphone) | 0.98″ (25.0 mm) long, 0.40″ (10.2 mm) diameter |
Output Connector (power module) | Integral 3-pin XLRM-type (wired only) |
Accessories Included | AT8418 UniMount® microphone instrument mount; AT8538 power module (wired only); soft protective pouch |
Audio-Technica Case Style | M12 |