PRO70

PRO70

Gallery

OVERVIEW

The PRO70 is a miniature condenser microphone renowned for its consistent performance and versatility. Whether used as a clip-on lavalier for natural vocal reproduction or for capturing the nuances of acoustic guitar, this microphone ensures clear and dependable sound pickup. Designed to blend seamlessly into any setting, it prioritizes clarity and comfort without drawing attention to itself.
Read More Read Less

Miniature condenser microphone suitable for vocal and acoustic guitar applications

Provides natural and articulate vocal reproduction as a clip-on lavalier (clothing clip included)

Excels in capturing the nuances of acoustic guitar with included instrument adapter

Cardioid polar pattern reduces pickup of side and rear sounds, enhancing isolation of the desired sound source

Switchable low-frequency roll-off minimizes room noise pickup

Features corrosion-resistant gold-plated XLRM-type connector

Can be powered by battery or phantom power

6-foot (1.8 meters) cable permanently attached between microphone and power module

Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 100-14,000 Hz
Low Frequency Roll Off 80 Hz, 18 dB/octave
Open Circuit Sensitivity Phantom: -45 dB (5.6 mV) re 1V at 1 Pa Battery: -45 dB (5.6 mV) re 1V at 1 Pa
Maximum Input Sound Level Phantom: 123 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range Phantom: 96 dB, 1 kHz at Max SPL Battery: 96 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 67 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Battery Type 1.5V AA/UM3
Battery Current/Life 0.4 mA / 1200 hours typical (alkaline)
Switches Off, on-flat, on-roll-off
Weight (microphone) 0.3 oz (8 g)
Weight (power module) 4.7 oz (134 g)
Cable Integral 6′ (1.8 m), permanently attached between microphone and power module
Dimensions (power module) 3.27″ (83.0 mm) H x 2.48″ (63.0 mm) W x 0.87″ (22.0 mm) D
Dimensions (microphone) 0.98″ (25.0 mm) long, 0.40″ (10.2 mm) diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8411 clothing clip; AT8444 instrument adapter; power module; windscreen; battery; soft protective pouch
Audio-Technica Case Style M1

Welcome Back!

Register

Password Requirements:

  • At least 8 characters
  • At least 1 lowercase letter
  • At least 1 uppercase letter
  • At least 1 numerical number

An account is already registered with that username. Please choose another.