The ATND1061 Beamforming Ceiling Array Microphone stands as a cutting-edge solution tailored for conference rooms, boardrooms, and meeting spaces of various sizes. This microphone, either used individually or in multiples for larger venues, captures the voices of speakers with exceptional clarity while minimizing distracting ambient sounds. Designed with state-of-the-art technology, the ATND1061 blends professional-grade performance with a familiar form factor, resembling the size of a wireless access point. Its ease of installation, setup, and operation make it an indispensable tool for enhancing communication in any environment.

Read More Read Less

Ideal for conference rooms, boardrooms, and meeting spaces large and small

Equipped with voice lift technology for uniform audio distribution across large areas

Dante-enabled variant (ATND1061DAN) facilitates seamless integration with PTZ cameras and other video equipment over IP

Powerful onboard DSP ensures optimal audio quality with features like automix, acoustic echo cancellation, noise reduction, automatic gain control, and 4-band EQ

User-friendly Digital Microphone Manager software simplifies configuration for single or multiple ATND1061 microphones

Six individual output channels with up to 32 user-defined microphone pickup zones provide flexibility to accommodate diverse room sizes and meeting types

Proprietary voice activity detection (VAD) technology distinguishes between voice and unwanted noises

Configurable exclusion zones help eliminate known sources of unwanted noise

Two network ports offer Single Cable and Split modes for transmitting Dante audio and microphone control data over category cable (ATND1061DAN)

Versatile mounting options include flush or surface mounting in drop ceilings or hard ceilings, or installation in open architecture spaces using VESA mounts

UL 2043 compliant for safe installation in plenum spaces

Comes with tile bridge, safety wiring, mounting hardware, and accessories for convenient installation

Low-reflective white finish blends seamlessly with most ceiling tiles

Powered by network PoE for simplified setup and operation

Beam Width 90-degrees
Polar Pattern Beam pattern
Frequency Response 60 Hz to 18,000 Hz
Maximum Input Sound Level 102 dBSPL
Sensitivity -8 dBFS (1 kHz, 94 dBSPL)
Dynamic Range 89 dB (A-weighted)
Signal-to-Noise Ratio 61.5 dB (A-weighted)
Self-Noise 25 dBSPL (A-weighted)
Analog Audio
Frequency Response 20 Hz to 20 kHz (+1.0/-2.0 dB)
Dynamic Range 100 dB (A-weighted)
Signal to Noise Ratio 80 dB (A-weighted)
Headroom 20 dB
Residual Noise -75.8 dBu (A-weighted)
T.H.D <0.1% (1 kHz, unity)
Analog Input MIC Maximum: -30 dBu
MIC Unity: -50 dBu
LINE Maximum: +12.2 dBu
LINE Unity: -10 dBV, Switchable
Analog Output OUTPUT Maximum: +19.2 dBu
OUTPUT Unity: +4 dBu/-10 dBV/-33 dBV, Switchable
General Specifications – Beamforming Array
Power Requirement PoE (IEEE 802.3af Class 0)
Power Consumption Max. 7 W
Operation Temperature Range 0°C to 40°C (32°F to 104°F)
Operation Humidity Range 25% to 85% (Non condensing)
Dimensions 227.5 mm (9.0”) × 227.5 mm (9.0”) × 30 mm (1.2”) (W × D×H)
Weight 1250 g (44 oz)
Network Dante: 1 Gbps
IP control: 100 Mbps
Digital Audio Sampling rate: 48 kHz
Bit depth: 24 bit
Latency Microphone (CH1 to CH6): 47 msec
Microphone (Auto Mix CH): 79 msec
Dante: Min. 250 usec, Max. 5 msec
I/O Connector Network/Dante: RJ-45
Analog input: Euroblock 3 pin
Analog output: Euroblock 3 pin
GPI: Euroblock 3 pin
Phantom Power Analog input: 12 V
Included Accessories ・IR remote controller
・Surface mount adapter
・Screw (M4 × 50 mm) × 4
・Flush mount adapter
・Flush mount cover
・Screw (M4 × 10 mm) × 12
・Hole cover
・Nut × 4
・Snap bushing × 2
・Tile bridge A × 2
・Tile bridge B × 2
・Tile bridge C × 4
・Seismic cable
・Zip tie
・Safety belt
・Euroblock connector × 3
・Installation template

Related Products:

Welcome Back!


Password Requirements:

  • At least 8 characters
  • At least 1 lowercase letter
  • At least 1 uppercase letter
  • At least 1 numerical number