The ATND1061 Beamforming Ceiling Array Microphone stands as a cutting-edge solution tailored for conference rooms, boardrooms, and meeting spaces of various sizes. This microphone, either used individually or in multiples for larger venues, captures the voices of speakers with exceptional clarity while minimizing distracting ambient sounds. Designed with state-of-the-art technology, the ATND1061 blends professional-grade performance with a familiar form factor, resembling the size of a wireless access point. Its ease of installation, setup, and operation make it an indispensable tool for enhancing communication in any environment.
Ideal for conference rooms, boardrooms, and meeting spaces large and small
Equipped with voice lift technology for uniform audio distribution across large areas
Dante-enabled variant (ATND1061DAN) facilitates seamless integration with PTZ cameras and other video equipment over IP
Powerful onboard DSP ensures optimal audio quality with features like automix, acoustic echo cancellation, noise reduction, automatic gain control, and 4-band EQ
User-friendly Digital Microphone Manager software simplifies configuration for single or multiple ATND1061 microphones
Six individual output channels with up to 32 user-defined microphone pickup zones provide flexibility to accommodate diverse room sizes and meeting types
Proprietary voice activity detection (VAD) technology distinguishes between voice and unwanted noises
Configurable exclusion zones help eliminate known sources of unwanted noise
Two network ports offer Single Cable and Split modes for transmitting Dante audio and microphone control data over category cable (ATND1061DAN)
Versatile mounting options include flush or surface mounting in drop ceilings or hard ceilings, or installation in open architecture spaces using VESA mounts
UL 2043 compliant for safe installation in plenum spaces
Comes with tile bridge, safety wiring, mounting hardware, and accessories for convenient installation
Low-reflective white finish blends seamlessly with most ceiling tiles
Powered by network PoE for simplified setup and operation
Microphone | |
---|---|
Beam Width | 90-degrees |
Polar Pattern | Beam pattern |
Frequency Response | 60 Hz to 18,000 Hz |
Maximum Input Sound Level | 102 dBSPL |
Sensitivity | -8 dBFS (1 kHz, 94 dBSPL) |
Dynamic Range | 89 dB (A-weighted) |
Signal-to-Noise Ratio | 61.5 dB (A-weighted) |
Self-Noise | 25 dBSPL (A-weighted) |
Analog Audio | |
---|---|
Frequency Response | 20 Hz to 20 kHz (+1.0/-2.0 dB) |
Dynamic Range | 100 dB (A-weighted) |
Signal to Noise Ratio | 80 dB (A-weighted) |
Headroom | 20 dB |
Residual Noise | -75.8 dBu (A-weighted) |
T.H.D | <0.1% (1 kHz, unity) |
Analog Input | MIC Maximum: -30 dBu MIC Unity: -50 dBu LINE Maximum: +12.2 dBu LINE Unity: -10 dBV, Switchable |
Analog Output | OUTPUT Maximum: +19.2 dBu OUTPUT Unity: +4 dBu/-10 dBV/-33 dBV, Switchable |
General Specifications – Beamforming Array | |
---|---|
Power Requirement | PoE (IEEE 802.3af Class 0) |
Power Consumption | Max. 7 W |
Operation Temperature Range | 0°C to 40°C (32°F to 104°F) |
Operation Humidity Range | 25% to 85% (Non condensing) |
Dimensions | 227.5 mm (9.0”) × 227.5 mm (9.0”) × 30 mm (1.2”) (W × D×H) |
Weight | 1250 g (44 oz) |
Network | Dante: 1 Gbps IP control: 100 Mbps |
Digital Audio | Sampling rate: 48 kHz Bit depth: 24 bit |
Latency | Microphone (CH1 to CH6): 47 msec Microphone (Auto Mix CH): 79 msec Dante: Min. 250 usec, Max. 5 msec |
I/O Connector | Network/Dante: RJ-45 Analog input: Euroblock 3 pin Analog output: Euroblock 3 pin GPI: Euroblock 3 pin |
Phantom Power | Analog input: 12 V |
Included Accessories | ・IR remote controller ・Surface mount adapter ・Screw (M4 × 50 mm) × 4 ・Flush mount adapter ・Flush mount cover ・Screw (M4 × 10 mm) × 12 ・Hole cover ・Nut × 4 ・Snap bushing × 2 ・Tile bridge A × 2 ・Tile bridge B × 2 ・Tile bridge C × 4 ・Seismic cable ・Zip tie ・Safety belt ・Euroblock connector × 3 ・Installation template |